!!! AMSTRAD 20100 20200 20300 HD INDB-7 v.008 Flash-Version !!!

Kapat
X
 
  • Zaman
  • Gösterim
Clear All
yeni mesajlar
  • ELMADAÐLI
    Senior Member
    • 05-11-2004
    • 3194

    !!! AMSTRAD 20100 20200 20300 HD INDB-7 v.008 Flash-Version !!!

    INDB-7 v.008 Flash-Version

    INDB-7 v.008
    Image created only from flash

    This latest version will be released for the 9x series of tuners.
    In connection with the termination of the support of the AAF and Tideglo we see no interest in the future development of the firmware.

    This is our last gift to the users 900 910 9000 91 100 9500 models

    Perhaps the development of the firmware will be extended to other tuners, such as Wu + or Clark

    Tested 900-ok
    Tested 910-ok
    Tested 91hd-ok
    Tested 100hd-ok

    Not Tested 9000
    Not Tested 9500

    Attention - all parameter settings in bluepanel
    1- swap file must present in you hdd or usb
    2- hddusb not enable automaticly before you not set all parameters

    After 1 start you must do next step

    1- Go to Bluepanel->Swap Manager and set all parameters in settings menu
    2- After set hddusb configuration (swap, partition,Rec folder,etc ) press "SAVE KEYS"
    3- After "Save" press "Run Settings Keys"
    4- Press "Test Key" from looking created parameters
    5- Set you like screens parameters in BluePanel -Settings-ScreensConfiguration
    -Circle Volume indicator,
    -Rec inbobar,
    -Analog or digital clock,
    -QuickEpg,
    -Fool or Little EMUbar and BluePanel
    -Infobar type
    -Led Indicatore Type
    -Third infobar
    -other screen parameters

    5- Install only one emu (free mem in image must be >2000kb)
    if you wont install other emu- delete first before
    ( emu have defoult settings. Ask you shareprovider about work settings for you emulator)


    - Blue Panel v2 matrix type
    - A new emu manager v2-added button stop and restart mode and a full (see picture below)
    - New Disks Manage
    - Universal driver 2870/3070/5170 WIFI c indication of the Stick
    - Added Stop and Reboot in EMU-Manager
    - Fixed a bug when switching default_gateway LAN WAN
    - Completed update renders most of the converters and to accelerate the mining output interface parameters
    - Minor updates to the media player and YouTube
    - Added plugins Foreca / FontManager with the weather on the day of the week in Russian
    - Fixed SeekBar (Rewind the position of the cursor-label work with all records and MP3)
    - Added new features to manage skins in the settings panel of blue-
    - Added a change in the positions of all infobars blupanel (infobar, sekondinfobar, ekstrabar and movipleer)
    - Added a change fonts
    - Added picons in media player, and the list of records movipleer
    - Added option blupaneli in the style of light and full (choose in blupaneli in skinsetape)
    - Added flashing Rec on the TV screen during recording
    - Added a rekinfobar
    - Added a new manager full
    - Added plugin automatic cache clearing
    - Added plugin treler viem
    - Added output **** keys in infopanel EMU manager
    - Fixed space in 9000/9500 models -( not tested )








    Download-INDB-7 v.008 Flash-Version




    __________________
    Son düzenleme ELMADAĞLI; 21-04-2012, 17:40.
  • ELMADAÐLI
    Senior Member
    • 05-11-2004
    • 3194

    #2
    Konu: !!! AMSTRAD 20100 20200 20300 HD INDB-7 v.008 Flash-Version !!!

    Latest PGI Image - IPbox 91 HD/Cuberevo 250 HD

    | PGI v1.3, Kumonga |
    +-----------------------------+



    DIESE SOFTWARE WIRD "SO WIE SIE IST" OHNE GARANTIE ZUR VERFÜGUNG GESTELLT. DAS PGI TEAM LEHNT AUSDRÜCKLICH ALLE STILLSCHWEIGENDEN GARANTIEN AB, DARIN EINGESCHLOSSEN, JEDOCH NICHT AUSSCHLIESSLICH, STILLSCHWEIGENDE GARANTIEN FÜR TITELRECHTE, VERFÜGBARKEIT, LEISTUNG, NICHT-VERSTOSS, MARKTGÄNGIGKEIT ODER EIGNUNG FÜR EINEN BESTIMMTEN ZWECK. PGI GARANTIERT NICHT, DASS DIE SOFTWARE ODER DAZUGEHÖRIGE DOKUMENTATION KORREKT, AKKURAT, ZUVERLÄSSIG ODER IN ANDERER WEISE FEHLERFREI SIND. DAS GESAMTE RISIKO BEZÜGLICH ERGEBNISSEN UND LEISTUNG DER SOFTWARE UND DAZUGEHÖRIGER DOKUMENTATION LIEGT BEI IHNEN.

    Änderungen in PGI 1.3
    ================================================== ====================

    - Neu: Aufnahmen von zwei Kanälen des gleichen Transponders funktionieren jetzt
    - Neu: Beim laufenden Programm in der Kanalliste kann die verbleibende / abgelaufene Zeit in Minuten oder in Prozent angezeigt werden (neue Option im PGI Einstellungen Menü)
    - Neu: Die Programmbeschreibung wird nun in der Kanalliste angezeigt (eine Zeile +3 EPG Datensätze Modus)
    - Neu: DISEqC 1.0/1.1 Einstellung hinzugefügt für drehbare Schüsseln, die im sogenannten "kaskadierten" Betrieb sind: Motor und DISEqC
    - Neu: Der Receiver merkt sich die zuletzt angesehene Aufnahme in der Aufnahmeliste
    - Neu: Einige Festplattenoptionen hinzugefügt, entfernt und abgeändert. Bitte lesen Sie die HDD_DE.txt (ruhig auch ein zweites mal)
    * HDD_MEDIA, NFS_REC und NFS_REC_PROTO Parameter in pgi.conf wurden zusammengefügt zu einer einzelnen neuen Option Namens MEDIA_DEVICE
    * MEDIA_DEVICE kann mit der UUID der Partition oder mit der klassischen /dev/sdxX Syntax angegeben werden
    * mkdosfs tools hinzugefügt zum Formatieren von Festplatten / USB Flash Partitionen mit FAT32
    * Alle SWAP Partitionen auf allen verfügbaren Medien werden jetzt automatisch gemountet, bedeutet SWAP muss nicht mehr die erste Partition auf der Platte sein
    * SWAP kann jetzt auch eine normale Datei sein
    - Neu: Einige USB 3G/UMTS Modembezogene Optionen wurden hinzugefügt, entfernt und verändert (siehe NETWORK_de.txt)
    * USB_MODEM aus der pgi.conf entfernt weil USB_modeswitch nun USB Modems automatisch umschaltet
    * PPPD_PEER Parameter wurde umbenannt in PPP und ist der einzige Parameter, der noch benötigt damit 3G/UMTS Modems eine Verbindung herstellen
    * picocom utility hinzugefügt zum Testen und Einstellen eines USB Modems
    * Verbesserte 3G Modem config Templates in /var/etc/ppp inklusive "on-demand" Verbindungen (Einwahl nur falls benötigt, automatische Trennung wenn nicht mehr benötigt)
    - Fix: Verbesserung des Nichtflüchtigen EPG.dat handlings (wenn kein USB/SATA Speicher verwendet wird), weniger Proleme mit der Kanalliste "Freezers" usw.
    - Fix: EPG Datenbank Struktur geändert: Aufnahmen beenden sollte jetzt wesentlich schneller gehen (Alle existierenden EPG Daten müssen erneuert werden)
    - Fix: Bei Direktaufnahmen arbeitet die Popup-Einstellung für Herunterfahren/Standby Option nun korrekt.
    - Fix: Der richtige Name von Aufnahmen wird jetzt angezeigt
    - Fix: Das Editieren der Bezeichnungen von Aufnahmen (anstatt des Aufnahmenkanals) ist nun möglich.
    - Fix: WebTV arbeitete nicht korrekt wenn der zweite Tuner benutzt werden sollte
    - Fix: DVB Untertitel gefixt und verbessert (Speziell für die nordischen Kanäle)
    - Fix: Zeitlinie im EPG Grid bewegt sich jetzt korrekt
    - Update: OpenSSL, USB_modeswitch, Busybox, MC, Freetype, SQLite und Transponderdatabase upgedatet
    - Entfernt: Wettervorhersage


    Viel Spass,
    PGI Team






    THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. UNDER NO CIRCUMSTANCES WILL THE PGI SOFTWARE AUTHORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR EXEMPLARY DAMAGES, DATA LOSS OR HARDWARE MALFUNCTION, ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE UNDER NEGLIGENCE OR EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. BY INSTALLING AND USING THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.

    Change List for PGI 1.3
    ================================================== ========== ===================

    - New: Recording 2 channels from the same transponder works now
    - New: Current programme remaining/elapsed time can be displayed in minutes or as perecent in the channel list (new option in the PGI Settings menu)
    - New: Programme description is shown in the channel list (1 column + 3 EPG events mode), this is optional and can be turned on or off via the PGI Settings menu
    - New: Added DiSeqC 1.0/1.1 settings for motorised dishes used in so-called "cascaded" configurations: Motor + DiSeqC
    - New: Last watched recording is remembered in the recordings list
    - New: Added/removed and changed some HDD related options, please read HDD_en.txt (even if you have done so before)
    * HDD_MEDIA, NFS_REC and NFS_REC_PROTO parameters in pgi.conf have been merged into a single parameter called MEDIA_DEVICE
    * MEDIA_DEVICE can now be specified using partition's UUID as well as classic /dev/sdxX syntax
    * Included mkdosfs utilities to format disk/USB flash partitions as FAT32
    * All swap partitions on all available devices are now mounted automatically, i.e. swap does not need to be 1st partition on your disk
    * Swap can be an ordinary file now (see new parameter called SWAP_FILE in HDD_en.txt)
    - New: Added/removed and changed some USB 3G/UMTS modem related options (see NETWORK_en.txt)
    * Removed USB_MODEM option from pgi.conf since USB_modeswitch now operates automatically
    * PPPD_PEER parameter has been renamed to PPP; ATTENTION: PPP must be set to a valid value for USB_modeswitch to work (at boot)!
    * Added picocom utility for testing and setting up your USB modems (see NETWORK_en.txt for usage example)
    * Improved 3G modem config templates in /var/etc/ppp including "on-demand" connections (dial up only when required, autodisconnect when idle)
    - Fix: Improvements for non-persistent epg.dat handling (when there is no USB/SATA storage used), less problems with channel list "freezing", etc.
    - Fix: EPG database structure changes: stopping recordings should be faster now (all existing EPG data will need to be refreshed)
    - Fix: Instant recording popup setting for shutdown/standby power option is working correctly now
    - Fix: Recording names are displayed correctly now
    - Fix: Editing recording name (instead of recorded channel name) is possible now
    - Fix: WebTV was not working correctly when the second tuner was used
    - Fix: DVB subtitles fixes and improvements (especially for Nordic channels)
    - Fix: Timeline in EPG Grid moves properly now
    - Update: OpenSSL, USB_modeswitch, Busybox, MC, Freetype, SQLite, Dropbear, e2fsprogs and Transponder DB updates
    - Removed: Weather Info.



    FLASH
    http://www.multiupload.com/5VTB96ROLA

    USB

    http://www.multiupload.com/4UQWUL7O6O

    Yorum

    • ELMADAÐLI
      Senior Member
      • 05-11-2004
      • 3194

      #3
      Konu: !!! AMSTRAD 20100 20200 20300 HD INDB-7 v.008 Flash-Version !!!

      Enigma2 OpenSource SH4 Duckbox Project GIT-3129 PKT SVN-1321 HAARP v3b Flash Image

      Image is designed for installation on flash devices
      Support receiver: IPBOX 9000/910/900/91HD
      Kernel stm24-207

      Added by sh4 Duckbox Team:

      - [libeplayer3] update to ffmpeg 0.8.6
      - [eplayer3] playback aac-he streams with aac-lc
      - fix timing problem in filepush
      - [Player2 179/191] possible fix for chopped DTS sound on some files
      - [e2 nightly-0]introduce 3D Mode for OSD ( paint OSD twice in Side by Side or Top and Bottom )
      - [libeplayer3] support for OSD 3D modes for subtitles
      - [libeplayer2, libeplayer3] Close directory file handles after looking for subtitle files
      - new BusyBox 1.19.2 (stable) config and patches
      - extend streamproxy to support linuxdvbapi5
      - [player2_191/player2_179]resturucture dts fix. The fix now only applys to DTS streams and the playback time is only corrected on time differences up to 50ms this MAY fix some issues with async sound
      - [player191] adoptions from p179; bugfix for 710x receiver (HD channel problems)
      - [player2_191] fsynth bugfix
      - use utf8 as python default
      - adapt wrong page_offset and improve mem



      Added by PKT:

      - new function "live ecm" in infobar
      - show Channel Number on Front Pannel + ON/OFF switch in setup menu
      - upgrade CrossEPG svn 268
      - fix qwerty VirtualKeyboard (UK layout)
      - fix Backup/Autorestore function | LABEL=RECOVERY required
      - fix channel number showing on VFD if long channel name
      - set home directory to /root
      - EPG description on channel list -> ON
      - change reading of ecm.info
      - new converters and skins modifications
      - fix dimmer action when channel switch
      - fix parsing PROV, CAID, PID
      - moving EPG support to KeyMapper
      - ReferencePKT optimization
      - set PKT-GoldHD skin as default
      - fix CIFS mount if passwd is empty
      - MPlayer fix GS of EOF
      - upgrade formating device in Install Manager
      - update API of MyTube based on last CVS source
      - update EmuManager v1.0.6: add sh4Cam support & gbox fix
      - font FIX moved to Skin setup
      - removed unused files
      - BP menu settings modification
      - fix showing processes
      - res_emu in standby add in BP->Settings
      - tune and fix sys_info
      - add showing /Loaded modules/ in BP ->Menu ->System
      - update WIFI scripts:
      * add detecting of supported USB WLAN adapters
      * user is informed about unsupported device
      * optimize selecting WLAN driver
      * optimize starting WLAN driver
      - fix show event-progress in channel selection
      - fix crossEPG
      - PKT InstallManager 1.2.2
      - PKT KeyMapper 1.5
      - update Permanent Clock
      - fix EMUManager russian translate
      - add green button support in Media Player
      - fix streamproxy after reboot
      - add support for fake cccam

      + change only in HAARP V3b version
      - picons update
      - added BPanel activation in MoviePlayer ( key blue )
      - added compatibility to standard non PKTeams skins
      - fix dot on VFD if channel number is not available
      - fix for radio mode wallpaper
      - fix showing picons on channels list, when are located in /hdd/picon folder
      - add /media/usb/picon to picons search folders
      - 2nd generation of speed up channels zap
      - add standby smooth extingushing TV
      - channel list update 20-11-11
      - display quality improvement
      - new BluePanel 2D v3.1.21 with graphic interface:
      -- added function to check update is needed
      -- added color & numeric keys actions support to immidiate plugin/function/menu activation
      -- 1st row - keys: 1, 2, 3, 4
      -- 2nd row - keys: 5, 6, 7, 8
      -- 3rd row - keys: red, green, yellow, blue
      -- add menu key action support
      -- add changelog information menu
      -- add synchronization of local time and date from NTP server
      -- add On/Off the smooth extinguish TV while switching to standby mode
      - fix missing reference.dat
      - fix international fonts switch in Skin Setup
      - screenshot OSD fix
      - fix GS on GlassHD skin
      - upgrade e2 to 2011-09-13-experimental
      - add % loaded e2 process on VFD
      - fix exception on hddtemp running on box with non-sata port
      - [IP9K] standby clock fix
      - [IP9K] VFD Icons fix
      - [IP9K] add partitions automount to /media folder
      - [IP9K] fix sound drops
      - fix GS in TimeShift path Menu
      - sata HDD sleep in standby fix
      - add new Webinterface v1.6.8
      - add WebMedia 4.0
      - add new Multimedia items in BP
      - fix firmware update checking
      - some fixes for cardreader driver
      - add VFD Record Icon blinking

      User: root
      Pass: pkteam

      Known issue:
      newcs doesn't work as card reader, plaese use oscam.

      Regards
      Polish Koders Team


      ip9000_GIT-3129_PKT-1321_flash.tar.gz


      ip910_GIT-3129_PKT-1321_flash.tar.gz


      ip900_GIT-3129_PKT-1321_flash.tar.gz

      ip91_GIT-3129_PKT-1321_flash.tar.gz

      Yorum

      İşlem Yapılıyor