Tweet
Telefunken tv mavi menülü yeni modeller için
Menü-özellik kısmına girdikten sonra 1923 tuşla
ttx zaman tuşu kumandadan tv de volum -bas ekranda 38.9 yazıyor.
TVP UL 225 TX FT N-4 PT92 PBG
TV standby durumunda, kumandadan text saat tuşuna basılı tutup, ön panelde (ses
, (P+) ve (ses ye sırasıyla basılır. TV açıldığında (P+, tuşları ile fonksiyonlar seçilir, (ses+, ile ayar yapılır.
IF 38,9
INIT CTV832U 25/4
0
TBH 0C
TBM 02
TBL 01
TEH 865
TSH 430
TEM 430
TSM 146
TEL 146
TSL 045
Opt6 00
Opt5 05
Opt4 B0
Opt3 68
Opt2 08
Opt1 01
Bits1 00
Bits0 00
CL 8
AGC 14
Yo 5
Yp 5
Yn 5
Ys 5
WPB 32 (MAVİ)
WPG 48 (YEŞİL)
WPR 40 (KIRMIZI)
BLG 8
BLR 9
VSH 27 (HORİZANTAL-ekran yukarı,aşağı)
VSD
SC 11 (dar,geniş)
VA 41 (dar,geniş)
VS 29 (VERTİKAL-resim sağ,sol)
HS 32
HB 31
HP 31
IFL 13,9
Bunlarda Benden: (Tactless)
AKAI
CT-2119
CTV
Test Mode
Simultaneous press + & - on local panel and then power on with main switch.
Exit: POWER.
Allstar
3750
CTV
Hotel Mode
OFF:
Select programm 38. Simultaneous press
(3 sec) STORE & CONTROL+ on local keyboard. ON:
Select programm 38. Simultaneous press
(3 sec) STORE & PROGRAM- on local keyboard.
AudioTon
CTV 5502
10.3 90° MONO CTV
Child Lock
Clear
Press UP & DOWN buttons together on tv's
local control and then switch on. You will see
SERVICE MODE. Do not press any button, just power off the set, then on. AudioTon
CTV 5502
10.3 90° MONO CTV
Service Mode
Press UP & DOWN buttons together on tv's local control and then switch on.
Beko
CTV
Service Mode Simultaneous press P+ & P- on local panel and then power on with main switch.
Blaupunkt MM63-13VT FM240.00
CTV ATS
Press button P/C on RC and switch on TV with main switch.
Blaupunkt MM63-13VT FM240.00
CTV
Hotel Mode
Cancel
Press button 'i' on RC and switch on TV with main switch.
Brandt
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.
Continental
CT1412B CTV
Service Mode
Press and hold P+ and P- on local panel, then switch on TV with main switch.
Ferguson
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Ferguson
TX92
CTV
Hotel Mode
Cancel
Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.
Finlux
17/21B60
63/71Y2
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
GoldStar MC-51B CTV
Service Mode
Simultaneously press MENU, VOL-, PR- on the local panel.
Graetz BURGGRAF STEREO 4876
Digivision DIGI III 110° CTV
Service Mode
Turn on 'TV Internal Service Program' switch on the digital modul (SE on display). On RC: 1=U1
V SHIFT, 2=U2 V LIN DN, 3=U3 V LIN, 4=H1
H SHIFT, 5=H2 H AMP, 6=H3 EW AMP, 7= C, 8=C1, 9=C2, 0=H4 EW TRAPEZ... TV=MEMO, VOL+/-=ADJUST.
Grundig
CUC1800
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1800
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1800
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1805
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1805
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1805
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC1805
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1805
CTV
Service Mode
Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Grundig
CUC1805
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1806
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1806
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1806
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1806
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1806
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1821
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1821
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1821
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1822
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1822
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1822
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1824
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1824
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1824
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1825
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1825
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1825
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1825
CTV
ROM Data
Loading
Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on replacement of the NVM or uP.
Grundig
CUC1825
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1825
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1826
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1826
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1826
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1826
CTV
ROM Data
Loading
Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on replacement of the NVM or uP.
Grundig
CUC1826
CTV
Service Mode
Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Grundig
CUC1826
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1827
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1827
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC1827
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1827
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1827
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1828
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1828
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1828
CTV
EPROM Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1828
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1828
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1829
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1829
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1829
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1829
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1829
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1830
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1830
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1830
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1830
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1830
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1836
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1836
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1836
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1836
CTV Factory Default
Values
Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1836
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1842
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1842
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1842
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1842
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1842
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1851
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1851
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1851
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1852
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1852
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1852
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1881
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1881
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1881
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1892
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1892
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1892
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1894
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1894
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1894
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1894
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1894
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1929
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1929
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1929
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1929
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1929
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1952
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1952
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1952
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1952
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1952
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1962
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1962
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1962
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1962
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1962
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1983
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1983
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1983
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1983
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1983
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1984
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1984
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1984
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1984
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1984
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2020
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2020
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2020
CTV
Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2020
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2020
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2020
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2030
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2030
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2030
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2030
CTV
Hotel Mode
Depress and hold button 'i' on the RC while
switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2030
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2030
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2031
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2031
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2031
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2031
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2031
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2031
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2050
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2050
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2050
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2050
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2050
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2050
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2051
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2051
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2051
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2051
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2051
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2051
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC6300
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6300
CTV Default Values Entering
Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide:
'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.
Grundig
CUC6300
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat
the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6300
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC6301
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6301
CTV Default Values Entering
Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide:
'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.
Grundig
CUC6301
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6301
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC6310
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6310
CTV Default Values Entering
Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide:
'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.
Grundig
CUC6310
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu
line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6310
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC6330
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6331
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6360
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6360
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6360
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6360
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6360
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6360
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6365
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6365
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6365
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6365
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6365
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6365
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6380
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6380
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6380
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6380
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6380
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6380
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6450
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6450
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6450
CTV
EPROM Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6450
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6450
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6450
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6460
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6460
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6460
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6460
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6460
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6460
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6469
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6469
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6469
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6469
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6469
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6469
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC7300
CTV
Default Values Entering
Depress and hold down button 'P-' on the RC
and switch the TV on from Standby with the
local 'P+' button. (This is only possible once on replacement of the NVM or uP).
Grundig
CUC7300
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7300
CTV
Hotel Mode
Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'.
Grundig
CUC7300
CTV Volume Offset Cancel
Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button.
Grundig
CUC7301
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7302
CTV Default Values Entering
Depress and hold down button 'P-' on the RC
and switch the TV on from Standby with the
local 'P+' button. (This is only possible once on replacement of the NVM or uP).
Grundig
CUC7302
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7302
CTV
Hotel Mode
Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'.
Grundig
CUC7302
CTV Volume Offset Cancel
Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button.
Grundig
CUC7303
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC7303
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7303
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC7305
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC7305
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7305
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'.
Grundig
CUC7350
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7851
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7851
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7880
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7880
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7890
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7890
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7951
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7951
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
GV200 to GV250
VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the STOP button. Grundig
GV201-1
VCR Electronic Lock Cancel
Press the 'STANDBY' button on the remote
control handset until 'FREE' is indicated on the display of the video recorder.
Grundig
GV25SV/5
GV45SV/5
VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV280PC GV280S VCR
Electronic
Lock Cancel
Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.
Grundig
GV400
GV400GB GV400OST VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV4000VPS GV4001
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV4003VPS VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by)
press the Stop button on the RC until 'FREE' appears on the display of the recorder. Grundig
GV400VPS GV401VPT VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV4010SV-VPT GV4092.. GV4192VPS GV4200SV-VPT GV4400HiFi GV4592..
VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV402
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV404SV GV405EURO GV406EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV410
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV410VPS GV411
VCR Electronic
Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV411-1
VCR Electronic Lock Cancel
Press and hold the 'STAND-BY' button on the RC (ca. 5s), until 'UNLOCKED' appears on the display of the recorder.
Grundig GV411OST GV412
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV414SV GV415EURO GV416EURO GV420VPT VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV430
GV430GB VCR Electronic
Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV430VPS GV434SV GV435EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV440.. GV450.. GV460..
GV464.. GV465EURO GV470.. VCR Electronic
Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV500.. GV501VPT GV505EURO GV506EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV5000
GV5000GB GV5000VPS GV5000VPS/5
VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV5002VPS GV5003
GV5008
GV5050
VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV5050SV GV5050SV/1
GV5055EURO GV5095.. VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV510SV GV511
GV515EURO
GV530.. GV535EURO GV540.. GV545EURO GV560.. GV565EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV5300.. VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV5395.. GV5400.. GV5695HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV600
GV630
GV640HiFi GV640NIC GV645EURO GV650HiFi GV660HiFi GV660NIC GV665EURO GV670SHiFi GV670SNIC GV690SHiFi GV690SNIC VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV6096SV GV6096SV/1
GV6396SV GV6596HiFi GV6596NIC
VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV740.. GV745EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV7400.. VCR Electronic Lock Cancel
Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.
Grundig GV7497NIC VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV8.. KV8.. SE8.. VCR
Electronic
Lock Cancel
Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.
Grundig GVP600ICNEURO VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
KV5001VPS/5
KV5301VPS/5
VCR Electronic
Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
MV4005
MV4105
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig SE4100VPS SE4104SV SE4120SV VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig SE5102SV SE5104SV SE5106HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig SE6102SV SE6104SV SE6106HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig SE7104SV VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
SE7105
VCR Electronic Lock Cancel
Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.
Grundig SE7106HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
TVR3700
VCR Electronic Lock Cancel
Press and hold STOP button on the RC and depress the PLAY button on the video recorder. Press the 'STAND-BY' button or disconnect the video recorder from the mains.
Grundig
TVR3701
TVR3705
TVR3710
TVR3720
TVR3730
VCR Electronic Lock Cancel
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.
Grundig
TVR4500
TVR4510
VCR Electronic Lock Cancel
Interconnect the service test points on the keyboard control unit for a short period. Switch the unit off and disconnect it from mains.
Grundig
TVR5100
TVR5130
TVR5500
VCR Electronic Lock Cancel
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.
Grundig
TVR5510
VCR Electronic Lock Cancel
Interconnect the service test points on the keyboard control unit for a short period.
Switch the unit off and disconnect it from mains.
Grundig
TVR5530
VCR Electronic Lock Cancel
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.
Grundig
VS200 to VS267
VCR Electronic Lock Cancel
Switch the video recorder off. Remove the top of the cabinet. Unplug the B1 connector on the sequence control. Switch the recorder on. After approx. 2 seconds, re-insert the B1 connector. Switch the video recorder off. Re-fit the top of the cabinet.
Grundig
VS300 to VS460
VCR Electronic Lock Cancel
Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on. Interconnect the service test points on the keyboard control unit for a short period. Press the STOP button. Switch the video recorder
off. Re-fit the top of cabinet. Grundig
VS500
VCR Electronic Lock Cancel
Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button '0000'. Press the STOP button.
Grundig
VS505 to VS510
VCR Electronic Lock Cancel
Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.
Grundig
VS520 to VS550
VCR Electronic Lock Cancel
Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on. Interconnect the service test points on the keyboard control unit for a short period. Press the STOP button. Switch the video recorder
off. Re-fit the top of cabinet. Grundig
VS600 to VS960
VCR Electronic Lock Cancel
Enter the numbers 4 9 3 4 on the remote control
handset in this order and confirm with the button 'OK'. Press the STOP button.
ITT
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
LG MC64
CTV
Service Mode
Simultaneous press OK on RC & local panel. LG
MC84
CTV
Service Mode
Simultaneous press OK on RC & local panel.
Loewe.
Art.-Nr. 64420
66426 66449
66450 66460
66480 66490
C9000
CTV
TV Service
Mode
Simultaneous press CM on the RC & "Service"
key on the control panel. Select:
MEM IN/OUT. Adjust:
VOL +/-. Store: X.
Exit: TV. Loewe.
Art.-Nr. 64420
66426 66449
66450 66460
66480 66490
C9000
CTV
VT Service
Mode
Simultaneous press VT on the RC & "Service"
key on the control panel. Select:
MEM IN/OUT. Adjust:
VOL +/-. Store: X.
Exit: TV.
Loewe. C9003
CTV
Service Mode
On the local control press function key five times
(indication "Service" will appear), afterwards within a sec. press key "MEN" on the remote control.
Store: X. Exit: TV. Loewe. Q2200
CTV
Service Mode
Go to 'SERVICE' in menu and then quick press
'MENU' on the RC. Select:
yellow cursors. Adjust:
+/-. Store:
'X'. Exit:
'TV'.
Luxor
5585-21A1
7057-27
63/7954
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
Mitsubishi CT21M5E CTV
Service Mode
Press S701 (on board) and button 9 (in 5s). Store:
'0'. Exit: stand-by.
NEC XExx XPxx XVxx MON
Service Mode
Select DISPLAY MODE. Press PROCEED. Press and hold RESET. Then simultaneous
press + & -. 'Warning Entering Service Menu...'
appears. Press PROCEED for enter. Be careful! You can damage a monitor!
Nokia
6364, 7364
2B-F CTV
Service Mode
Quick press: --\-, MENU, TV. Nokia
EUROSTEREO CTV
Service Mode
In 1s press buttons '-/--', 'MENU', 'TV'. Select:
PR+/-. Adjust: VOL+/-. Store:
fill-dot-symbol
on RC (near 'i' button). Exit:
'STANDBY'. Nokia
63/7168 55A1-0
45H1-0 55Y2-0
63/7157 63/7177
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV Nokia
STEREO PLUS CTV
Service Mode
i --> M --> PROGR. Controls:
cursor buttons. Store:
M. Exit: TV
Nordmende
DC1
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s). Select:
numbers buttons. Adjust:
+/-. Store:
red button. Exit:
'MUTE'. Nordmende DC2
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s). Select:
numbers buttons. Adjust:
+/-. Store:
red button. Exit:
'MUTE'. Nordmende Color 3038
F15-03 110° CTV
MDA2061
Replacement
After replacement of the MDA2061 (IR73) the TV receiver acts as folows: a) All programme storages have stored Ch00. b) The indicator shows German function characters. c) PAL and SECAM EAST standard recepcion is possible
(not NTSC and/or SECAM WEST).
If required to change according to paragr. b and c then switch off the set by the mains switch. Press both buttons + and - for volume on TV
and simultaneously switch the set on with the mains switch. Keep the two volume buttons pressed until the display indicates Pr. After 8s the display indicates __. Now the following buttons can be presseed on the RC, thus additional corresponding segments will be
illuminated: Button '1' function symbols indicate international display. Reversible to German display with button '2'. Button '5' additional SECAM WEST and/or NTSC reception
(Multistandard). Reversible to Single Standard with button '3'.
Store: Stand-By. Nordmende ICC10
CTV
Service Mode
Switch to Stand By. Switch off with the mains switch. Press and hold 'VT' on RC then switch on with the mains switch.
Nordmende
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press blue button on RC and switch on TV with main switch. Press blue button again. (WARNING: scart must be free.)
Palladium
TV-100
CTV
Service Mode
Simultaneous press red & blue buttons on RC
then (in 5 sec.) simultaneously press P- & P+
on local keyboard. Commands:
arrows. Store: OK. Exit: TV.
Panasonic
EURO-1
CTV
Service Mode
In Sound-Menu Low-tone-regel to MAX and High-tone-regel to MIN. Press VOL- on TV and RESET on RC in some time.
Select:
red
and green buttons. Adjust:
yellow and blue buttons.
Store:
'STORE'. Exit: switch off. Panasonic EURO-2
CTV
Service Mode
In Sound-Menu Low-tone-regel to MAX and
High-tone-regel to MIN. Press 'F' button on TV. Then press VOL- on TV and REVEAL on RC in
some time. Select:
red and green buttons. Adjust:
yellow and blue buttons. Store:
'STR'. Exit:
'N' on RC. Panasonic MX-3
MX-3C CTV
Hotel Mode
ON:
Press simultaneously 'OFF TIMER' on RC
and 'CH.UP' local. OFF:
Press simultaneously 'OFF TIMER' on RC
and 'VOL-' local. Panasonic
MX-3
MX-3C CTV
Service Mode
Simultaneously press 'RECALL' on RC and
'VOL-' local. Exit: 'NORMAL' on RC.
Philips ANUBIS B CTV
Hotel Mode
ON:
Set HOTEL ON in Service Menu. Select programm 38. Simultaneous press (3 sec) INSTALL & P- on local keyboard.
OFF:
Set HOTEL OFF in Service Menu. Philips
ANUBIS B CTV
Service Mode
Simultaneously press VOL+ & P- on RC. Exit: STANDBY.
Philips Anubis S CTV
Hotel Mode
OFF:
Select programm 38. Simultaneous press
(3 sec) PR+ & VOL- on local keyboard. ON:
Select programm 38. Simultaneous press
(3 sec) STORE & PR- on local keyboard. Philips
L7.1A CTV
Service Mode
With special service RC. Or short M25, M25
on board and then switch on TV. Exit:
st-by. Philips L9.1
CTV
Hotel Mode
Select program 38 on the TV. Simultaneously press the keys VOLUME- and VOLUME+ on
the keyboard of the TV and the OSD key of the remote control.
Philips
L9H CTV
Service Mode This model also supports the 062596 sequence followed by [MENU] (service default) or
[i+]/[OSD] (service mode). Philips
MD1.2E CTV
Service Mode
There is a small Service jumper to short on the small signal PCB. When the TV is in this first level service mode, you can go in the second level service mode by pressing both MENU
and - keys on top of the TV at the same time. There you can read much parameters and proceed with most of the adjustments. In fact this method let you use an ordinary Remote control but you also need to open the back
cover. With the special service remote control,
a special code is sent to enter the service mode. Philips
MG3.1E CTV
Service Mode
Option 1: In the TV-set itself is a 3-pin connector with which either SERVICE-DEFAULT or
SERVICE-MODE can be activated. This connector is depicted 0356 (SERVICE-PINS) on page K7 (TXT&CONTROL). Shorting pins 1-2
will activate SERVICE-MODE. Shorting pins 2-3 will activate SERVICE-DEFAULT. Option 2: Activate these modes using the remote control. Obviously option 2 is the preferred method because the settings have to be changed using a remote control anyway.... To activate SERVICE-DEFAULT: Press 0 6 2 5 9 6 and then
the [menu] button. The message `Service Default' appears and channel `SER T' will be selected. This only sets some settings to a preset value
(color/brightness/volume and such). This mode is primarily intended to be used when the non volatile memory has been replaced. It is then loaded with the default values. To activate SERVICE-MODE: Press 0 6 2 5 9 6 and then
the [i+] button. After pressing 0 6 2 5 9 6 the message `Dealer' should have appeared.
Do not worry about the channel changing while you press the numbers.
Service technicians have the means of entering service mode using a special remote control. Philips
29PT9416
MG7.1
CTV
Service Mode
Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press
'MENU' again to clear it. The other way is to short the two service pins on the signal panel
(pins 2 and 3 of connector 0356). The advantage of this last method is that all the software protections are turned off.
Philips
Y6
CTV
Service Mode
Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press
'MENU' again to clear it. Philips
VR210/58
VCR Modulator off
Without cassette. Press and hold SYSTEM till
'G591' appears. Press and hold CLEAR(CL) till
'MOFF' appears. Exit: TV/STANBY. Philips VR210/58
VCR Modulator on
Without cassette. Press and hold SYSTEM till
'MOFF' appears. Press and hold CLEAR(CL) till
'G591' appears. Exit: TV/STANBY. Philips VR220/58
VCR
Child Lock
Cancel
Press CHILD LOCK (key-simbol) on the RC for 5s with the VCR switched on. Philips
VR220/58
VCR Modulator on/off
Without cassette. Press and hold STOP on the
RC and then press STOP/EJECT on VCR.
Select the line 'MODULATOR' on the TV screen
or 'MOD+' in the display with P+/-. In the display select 'OFF' / 'MOD-' (modulator off) with VOL-
or 'MOD+' (modulator on). Confirm with OK. Exit with MENU
Philips
VR220/58
VCR Modulator preset
Without cassette. Hold the STOP button on the RC. In addition press the STOP/EJECT button on the VCR until the pre-set modulator frequency appears in the display, e.g. 'M591'
(591MHz or 36 ch. UHF). Select line 'OPTIMIZE FREQUENCY' using P+/-. Enter new
modulator frequency with the numbers 0-9. In line 'SOUND SYSTEM' select the TV system using VOL+/-. 'G' = PAL B/G. 'K' = SECAM D/K. Confirm with OK. 'STORED' will appear briefly on the screen.
Philips
VR220/58
VCR Reset to factory settings
Disconect from the mains power supply. Press and hold the STANDBY/ON button on the device and reconnect to the mains power supply. Release the button when 'OSD' appears in the VCR display.
Philips
VR400/58
VCR
Auto ST-BY
off
Press and hold STOP till [] appears. Philips
VR400/58
VCR Modulator off
Without cassette. Press and hold SYSTEM till
'G591' appears. Press and hold CLEAR(CL) till
'MOFF' appears. Exit: TV/STANBY. Philips VR400/58
VCR Modulator on
Without cassette. Press and hold SYSTEM till
'MOFF' appears. Press and hold CLEAR(CL) till
'G591' appears. Exit: TV/STANBY. Philips VR400/58
VCR Modulator preset
Without cassette. VCR st-by. Press and hold
SYSTEM till 'G591' appears. System change:
SELECT.
Freq. Change: P +/-.
Store: OK. Exit:
TV/STANBY.
Revox D-TV C9003
CTV
Service Mode
On the local control press function key five times
(indication "Service" will appear), afterwards within a sec. press key "MEN" on the remote control.
Store: X. Exit: TV.
Saba ULTRACOLOR T55U42 T55U43
T63U42 T63U43
ICC5115ML 110
ICC5116MM 90° CTV Combination Lock Cancel
Switch off set with main switch. Switch on set with main switch and during doing this press the buttons + and - of volume control on the set's control bord simultaneously until the display lights. Display: SS... Press the button
'S' on the RC. Switch off with RC. Now the combination lock is unlocked and one can switch on again in the normal manner.
Saba
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Saba
T7032VT TX92
CTV
Hotel Mode
Cancel
Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.
Salora
28N8S
2B-F CTV
Service Mode
Quick press: --\-, MENU, TV. Salora
17/21SF 25/28X71
25/28SP50
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
Samsung
CB-14F1 CB-20P30
CB-20H1 CB-20S20
CB-21H1 CB-21P30
CB-21S20 CB-3373
CB-5020 CB-5073
CB-5079 CB-5320
CB-5373 CB-5379
S15A CTV
Service Mode
STAND-BY --> DISPLAY --> P.STD --> MUTE --> POWER ON.
Controls:
VOL +/-, CH +/-. Exit:
POWER OFF. Samsung CK5038
SCT11B CTV
Service Mode
STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.
Controls:
VOL +/-, CH +/-. Exit:
STATUS.
Samsung
CX5944 CX6844
SCT12B CTV
Service Mode
STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.
FACTORY MODE: set PSL=15 and PVA=63. Controls:
VOL +/-, CH +/-. Exit:
STATUS Samsung
CB-14V10 CB-3373
CB-14V20 CB-5073
CB-20P30 CB-5079
CB-20S10 CB-5373
CB-20S20
CB-21P30
CB-21S10
CB-21S20
SCT13B CTV
Service Mode
STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.
Controls:
VOL +/-, CH +/-. Exit:
STATUS. Samsung CS7272
SCT51A CTV
Service Mode
PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON
Samsung
CS-721
CS-723
SCT52A CTV
Service Mode
PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON
Samsung
TVP3350
TVP5050
SCV11A SCV11B
CTV/VCR Service Mode
STAND-BY --> P.STD --> MENU --> SLEEP --> POWER ON
Schneider
DTV 1
CTV
Service Mode
Simultaneous press Service-button on digi- bord & button C on RC.
Selection: Bass +/-. Adjust: Volume +/-.
Store: T. Exit: TV.
Schneider
DTV 100
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & P+ on local keyboard.
Commands: arrows. Store: OK.
Exit: TV.
Schneider
DTV 2
CTV
Service Mode
Like DTV 1 or simultaneous press Service- button (down right on RC) & C button on RC. Selection:
Bass +/-. Adjust: Volume +/-. Store: IDEAL. Exit:
TV. Schneider DTV 3
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: wheel. Adjust: ring. Store:
red button. Exit:
OFF. Schneider TV 4
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider STV7128
TV 8
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider TV 9
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider STV355FST CTV
Service Mode
MENU --> SERVICE --> OK --> 089
SEG
11AK18
CTV
Service Mode
MENU 1 6 7 5
SEG
11AK19
CTV
Service Mode
MENU 4 7 2 5
Seleco STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:OK (M). Exit:TV
Sharp
4BSA CTV
Service Mode
Short conntacts 2 & 6 on bord TB connector and press button 'MODE' on RC. Remove short. Store:auto.
Exit:'MODE'. Sharp
63CS-03S CS
CTV
Service Mode
Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.
Store:'POWER'. Sharp
D3000
CTV
Service Mode
Press Service-button on Digi-modul. Storen/off.
Exit:Service button. Sharp
Euro-DS1
CTV
Service Mode
Short conntacts 2 & 6 on Digi Modul Service Slot and then press button 'MODE' on RC. Storeromb-symbol) on RC.
Exit:standby, switch off, switch on, remove short. Sharp
54AT-15SC CTV
Service Mode
Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.
Store:'POWER'. Sharp
DV-5401S CTV
Service Mode
Locate place for 2 buttons on local keyboard
(main board) S754-MODE and S755-PRESET. Enter:short S754 (-SERV.
Commands:CH +/-. Store:short S755.
Siemens
FS369M4
CS9409
CTV
Service Mode
Info Center' --> 'Special Functions' --> 'Service'
--> Code Number 089
Siemens SAT Programm Lock
Unlock: Press key-symbol and 6 1 0 1.
Silva STV355FST CTV
Service Mode
MENU --> SERVICE --> OK --> 089
Sony
KV-E2531
KV-E2931
KV-E3431
AE-2
CTV
Service Mode
Turn on the main power switch of the set while pressing any two buttons on the front panel.
'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC.
In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.
Sony
KV-2170
KV-2180
KV-2540
BE4
CTV
Service Mode
? --> 5 --> VOL+ --> TV --> MENU Exit: 00
Sony
KV-B2911
CTV
Service Mode
Turn on the main power switch of the set while pressing any two buttons on the front panel.
'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC.
In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.
Sony
KV-G21M1
CTV
Service Mode
Switch TV to STANDBY.
DISPLAY --> 5 --> VOL+ --> POWER
Telefunken
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Telefunken
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:cursor buttons. Store:OK (M).
Exit:TV Telefunken TX-90
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Telefunken
TX-91
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Thomson
ICC19
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold blue button and then switch on with the mains switch. Press blue button again. Exit: switch off with mains switch. Thomson
ICC19
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold 'PROG-' and 'VOL-' and then switch on with the mains switch. Exit: switch off with mains switch.
Thomson
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Thomson
TX-90
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Thomson
TX-91
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Toshiba a2150
S5E CTV
Service Mode
Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard. Select: PR nr.. Adjust: VOL+/-. Store: auto. Exit: 'STANDBY'. Test picture: 'AV'.
Toshiba
2876DD
2988DG CTV
Service Mode
Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard. Select:PR+/-.
Adjust:VOL+/-. Store:auto.
Exit:'STANDBY'. Test picture: 'AV'.
Universum
6000
CTV
Service Mode
Switch on with main switch. Press 'MENU',
'TV', 'i'. If TV is still in st-by press 2x'TV', 'i'. Select and adjust with cursors. Store: 'OK'.
Exit: switch off with main switch
Menü-özellik kısmına girdikten sonra 1923 tuşla
ttx zaman tuşu kumandadan tv de volum -bas ekranda 38.9 yazıyor.
TVP UL 225 TX FT N-4 PT92 PBG
TV standby durumunda, kumandadan text saat tuşuna basılı tutup, ön panelde (ses
, (P+) ve (ses ye sırasıyla basılır. TV açıldığında (P+, tuşları ile fonksiyonlar seçilir, (ses+, ile ayar yapılır.IF 38,9
INIT CTV832U 25/4
0
TBH 0C
TBM 02
TBL 01
TEH 865
TSH 430
TEM 430
TSM 146
TEL 146
TSL 045
Opt6 00
Opt5 05
Opt4 B0
Opt3 68
Opt2 08
Opt1 01
Bits1 00
Bits0 00
CL 8
AGC 14
Yo 5
Yp 5
Yn 5
Ys 5
WPB 32 (MAVİ)
WPG 48 (YEŞİL)
WPR 40 (KIRMIZI)
BLG 8
BLR 9
VSH 27 (HORİZANTAL-ekran yukarı,aşağı)
VSD
SC 11 (dar,geniş)
VA 41 (dar,geniş)
VS 29 (VERTİKAL-resim sağ,sol)
HS 32
HB 31
HP 31
IFL 13,9
Bunlarda Benden: (Tactless)
AKAI
CT-2119
CTV
Test Mode
Simultaneous press + & - on local panel and then power on with main switch.
Exit: POWER.
Allstar
3750
CTV
Hotel Mode
OFF:
Select programm 38. Simultaneous press
(3 sec) STORE & CONTROL+ on local keyboard. ON:
Select programm 38. Simultaneous press
(3 sec) STORE & PROGRAM- on local keyboard.
AudioTon
CTV 5502
10.3 90° MONO CTV
Child Lock
Clear
Press UP & DOWN buttons together on tv's
local control and then switch on. You will see
SERVICE MODE. Do not press any button, just power off the set, then on. AudioTon
CTV 5502
10.3 90° MONO CTV
Service Mode
Press UP & DOWN buttons together on tv's local control and then switch on.
Beko
CTV
Service Mode Simultaneous press P+ & P- on local panel and then power on with main switch.
Blaupunkt MM63-13VT FM240.00
CTV ATS
Press button P/C on RC and switch on TV with main switch.
Blaupunkt MM63-13VT FM240.00
CTV
Hotel Mode
Cancel
Press button 'i' on RC and switch on TV with main switch.
Brandt
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.
Continental
CT1412B CTV
Service Mode
Press and hold P+ and P- on local panel, then switch on TV with main switch.
Ferguson
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Ferguson
TX92
CTV
Hotel Mode
Cancel
Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.
Finlux
17/21B60
63/71Y2
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
GoldStar MC-51B CTV
Service Mode
Simultaneously press MENU, VOL-, PR- on the local panel.
Graetz BURGGRAF STEREO 4876
Digivision DIGI III 110° CTV
Service Mode
Turn on 'TV Internal Service Program' switch on the digital modul (SE on display). On RC: 1=U1
V SHIFT, 2=U2 V LIN DN, 3=U3 V LIN, 4=H1
H SHIFT, 5=H2 H AMP, 6=H3 EW AMP, 7= C, 8=C1, 9=C2, 0=H4 EW TRAPEZ... TV=MEMO, VOL+/-=ADJUST.
Grundig
CUC1800
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1800
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1800
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1805
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1805
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1805
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC1805
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1805
CTV
Service Mode
Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Grundig
CUC1805
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1806
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1806
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1806
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1806
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1806
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1821
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1821
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1821
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1822
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1822
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1822
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1824
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1824
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1824
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1825
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1825
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1825
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1825
CTV
ROM Data
Loading
Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on replacement of the NVM or uP.
Grundig
CUC1825
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1825
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1826
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1826
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1826
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1826
CTV
ROM Data
Loading
Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on replacement of the NVM or uP.
Grundig
CUC1826
CTV
Service Mode
Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Grundig
CUC1826
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1827
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1827
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC1827
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1827
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1827
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1828
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1828
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1828
CTV
EPROM Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1828
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1828
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1829
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1829
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1829
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1829
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1829
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1830
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1830
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1830
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1830
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1830
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1836
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1836
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1836
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1836
CTV Factory Default
Values
Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1836
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1842
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1842
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1842
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1842
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1842
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1851
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1851
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1851
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1852
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1852
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1852
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1881
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1881
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1881
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1892
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1892
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1892
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1894
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1894
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1894
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1894
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1894
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1929
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1929
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1929
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1929
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1929
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1952
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1952
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1952
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1952
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1952
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1962
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1962
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1962
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1962
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1962
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1983
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1983
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1983
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1983
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1983
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1984
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1984
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1984
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1984
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1984
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2020
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2020
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2020
CTV
Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2020
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2020
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2020
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2030
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2030
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2030
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2030
CTV
Hotel Mode
Depress and hold button 'i' on the RC while
switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2030
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2030
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2031
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2031
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2031
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2031
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2031
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2031
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2050
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2050
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2050
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2050
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2050
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2050
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC2051
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC2051
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC2051
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button.
(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).
Grundig
CUC2051
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC2051
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC2051
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC6300
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6300
CTV Default Values Entering
Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide:
'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.
Grundig
CUC6300
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat
the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6300
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC6301
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6301
CTV Default Values Entering
Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide:
'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.
Grundig
CUC6301
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6301
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC6310
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6310
CTV Default Values Entering
Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide:
'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.
Grundig
CUC6310
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu
line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6310
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC6330
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6331
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6360
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6360
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6360
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6360
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6360
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6360
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6365
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6365
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6365
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6365
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6365
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6365
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6380
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6380
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6380
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6380
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6380
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6380
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6450
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6450
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6450
CTV
EPROM Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6450
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6450
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6450
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6460
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6460
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6460
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6460
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6460
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6460
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC6469
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC6469
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC6469
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC6469
CTV
Hotel Mode
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC6469
CTV
Service Mode
Depress and hold the 'P/C' button on the RC while switching on with the mains button. Grundig
CUC6469
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC7300
CTV
Default Values Entering
Depress and hold down button 'P-' on the RC
and switch the TV on from Standby with the
local 'P+' button. (This is only possible once on replacement of the NVM or uP).
Grundig
CUC7300
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7300
CTV
Hotel Mode
Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'.
Grundig
CUC7300
CTV Volume Offset Cancel
Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button.
Grundig
CUC7301
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7302
CTV Default Values Entering
Depress and hold down button 'P-' on the RC
and switch the TV on from Standby with the
local 'P+' button. (This is only possible once on replacement of the NVM or uP).
Grundig
CUC7302
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7302
CTV
Hotel Mode
Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'.
Grundig
CUC7302
CTV Volume Offset Cancel
Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button.
Grundig
CUC7303
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC7303
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7303
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'. Grundig
CUC7305
CTV
Band Limits
Cancelling
Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Grundig
CUC7305
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7305
CTV OSD
position
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the
OSD position in the menu and store with 'OK'.
Grundig
CUC7350
CTV
Hotel Mode
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Grundig
CUC7851
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7851
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7880
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7880
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7890
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7890
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC7951
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC7951
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
GV200 to GV250
VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the STOP button. Grundig
GV201-1
VCR Electronic Lock Cancel
Press the 'STANDBY' button on the remote
control handset until 'FREE' is indicated on the display of the video recorder.
Grundig
GV25SV/5
GV45SV/5
VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV280PC GV280S VCR
Electronic
Lock Cancel
Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.
Grundig
GV400
GV400GB GV400OST VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV4000VPS GV4001
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV4003VPS VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by)
press the Stop button on the RC until 'FREE' appears on the display of the recorder. Grundig
GV400VPS GV401VPT VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV4010SV-VPT GV4092.. GV4192VPS GV4200SV-VPT GV4400HiFi GV4592..
VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV402
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV404SV GV405EURO GV406EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV410
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV410VPS GV411
VCR Electronic
Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV411-1
VCR Electronic Lock Cancel
Press and hold the 'STAND-BY' button on the RC (ca. 5s), until 'UNLOCKED' appears on the display of the recorder.
Grundig GV411OST GV412
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV414SV GV415EURO GV416EURO GV420VPT VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV430
GV430GB VCR Electronic
Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig GV430VPS GV434SV GV435EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV440.. GV450.. GV460..
GV464.. GV465EURO GV470.. VCR Electronic
Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV500.. GV501VPT GV505EURO GV506EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV5000
GV5000GB GV5000VPS GV5000VPS/5
VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV5002VPS GV5003
GV5008
GV5050
VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV5050SV GV5050SV/1
GV5055EURO GV5095.. VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV510SV GV511
GV515EURO
GV530.. GV535EURO GV540.. GV545EURO GV560.. GV565EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV5300.. VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
GV5395.. GV5400.. GV5695HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
GV600
GV630
GV640HiFi GV640NIC GV645EURO GV650HiFi GV660HiFi GV660NIC GV665EURO GV670SHiFi GV670SNIC GV690SHiFi GV690SNIC VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV6096SV GV6096SV/1
GV6396SV GV6596HiFi GV6596NIC
VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV740.. GV745EURO VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV7400.. VCR Electronic Lock Cancel
Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.
Grundig GV7497NIC VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig GV8.. KV8.. SE8.. VCR
Electronic
Lock Cancel
Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.
Grundig GVP600ICNEURO VCR Electronic Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
KV5001VPS/5
KV5301VPS/5
VCR Electronic
Lock Cancel
Press the 'STAND-BY' button on the RC until
'FREE' appears on the display of the recorder. Grundig
MV4005
MV4105
VCR Electronic Lock Cancel
With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.
Grundig SE4100VPS SE4104SV SE4120SV VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig SE5102SV SE5104SV SE5106HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig SE6102SV SE6104SV SE6106HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig SE7104SV VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
SE7105
VCR Electronic Lock Cancel
Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.
Grundig SE7106HiFi VCR Electronic Lock Cancel
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the
remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.
Grundig
TVR3700
VCR Electronic Lock Cancel
Press and hold STOP button on the RC and depress the PLAY button on the video recorder. Press the 'STAND-BY' button or disconnect the video recorder from the mains.
Grundig
TVR3701
TVR3705
TVR3710
TVR3720
TVR3730
VCR Electronic Lock Cancel
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.
Grundig
TVR4500
TVR4510
VCR Electronic Lock Cancel
Interconnect the service test points on the keyboard control unit for a short period. Switch the unit off and disconnect it from mains.
Grundig
TVR5100
TVR5130
TVR5500
VCR Electronic Lock Cancel
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.
Grundig
TVR5510
VCR Electronic Lock Cancel
Interconnect the service test points on the keyboard control unit for a short period.
Switch the unit off and disconnect it from mains.
Grundig
TVR5530
VCR Electronic Lock Cancel
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.
Grundig
VS200 to VS267
VCR Electronic Lock Cancel
Switch the video recorder off. Remove the top of the cabinet. Unplug the B1 connector on the sequence control. Switch the recorder on. After approx. 2 seconds, re-insert the B1 connector. Switch the video recorder off. Re-fit the top of the cabinet.
Grundig
VS300 to VS460
VCR Electronic Lock Cancel
Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on. Interconnect the service test points on the keyboard control unit for a short period. Press the STOP button. Switch the video recorder
off. Re-fit the top of cabinet. Grundig
VS500
VCR Electronic Lock Cancel
Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button '0000'. Press the STOP button.
Grundig
VS505 to VS510
VCR Electronic Lock Cancel
Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.
Grundig
VS520 to VS550
VCR Electronic Lock Cancel
Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on. Interconnect the service test points on the keyboard control unit for a short period. Press the STOP button. Switch the video recorder
off. Re-fit the top of cabinet. Grundig
VS600 to VS960
VCR Electronic Lock Cancel
Enter the numbers 4 9 3 4 on the remote control
handset in this order and confirm with the button 'OK'. Press the STOP button.
ITT
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
LG MC64
CTV
Service Mode
Simultaneous press OK on RC & local panel. LG
MC84
CTV
Service Mode
Simultaneous press OK on RC & local panel.
Loewe.
Art.-Nr. 64420
66426 66449
66450 66460
66480 66490
C9000
CTV
TV Service
Mode
Simultaneous press CM on the RC & "Service"
key on the control panel. Select:
MEM IN/OUT. Adjust:
VOL +/-. Store: X.
Exit: TV. Loewe.
Art.-Nr. 64420
66426 66449
66450 66460
66480 66490
C9000
CTV
VT Service
Mode
Simultaneous press VT on the RC & "Service"
key on the control panel. Select:
MEM IN/OUT. Adjust:
VOL +/-. Store: X.
Exit: TV.
Loewe. C9003
CTV
Service Mode
On the local control press function key five times
(indication "Service" will appear), afterwards within a sec. press key "MEN" on the remote control.
Store: X. Exit: TV. Loewe. Q2200
CTV
Service Mode
Go to 'SERVICE' in menu and then quick press
'MENU' on the RC. Select:
yellow cursors. Adjust:
+/-. Store:
'X'. Exit:
'TV'.
Luxor
5585-21A1
7057-27
63/7954
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
Mitsubishi CT21M5E CTV
Service Mode
Press S701 (on board) and button 9 (in 5s). Store:
'0'. Exit: stand-by.
NEC XExx XPxx XVxx MON
Service Mode
Select DISPLAY MODE. Press PROCEED. Press and hold RESET. Then simultaneous
press + & -. 'Warning Entering Service Menu...'
appears. Press PROCEED for enter. Be careful! You can damage a monitor!
Nokia
6364, 7364
2B-F CTV
Service Mode
Quick press: --\-, MENU, TV. Nokia
EUROSTEREO CTV
Service Mode
In 1s press buttons '-/--', 'MENU', 'TV'. Select:
PR+/-. Adjust: VOL+/-. Store:
fill-dot-symbol
on RC (near 'i' button). Exit:
'STANDBY'. Nokia
63/7168 55A1-0
45H1-0 55Y2-0
63/7157 63/7177
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV Nokia
STEREO PLUS CTV
Service Mode
i --> M --> PROGR. Controls:
cursor buttons. Store:
M. Exit: TV
Nordmende
DC1
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s). Select:
numbers buttons. Adjust:
+/-. Store:
red button. Exit:
'MUTE'. Nordmende DC2
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s). Select:
numbers buttons. Adjust:
+/-. Store:
red button. Exit:
'MUTE'. Nordmende Color 3038
F15-03 110° CTV
MDA2061
Replacement
After replacement of the MDA2061 (IR73) the TV receiver acts as folows: a) All programme storages have stored Ch00. b) The indicator shows German function characters. c) PAL and SECAM EAST standard recepcion is possible
(not NTSC and/or SECAM WEST).
If required to change according to paragr. b and c then switch off the set by the mains switch. Press both buttons + and - for volume on TV
and simultaneously switch the set on with the mains switch. Keep the two volume buttons pressed until the display indicates Pr. After 8s the display indicates __. Now the following buttons can be presseed on the RC, thus additional corresponding segments will be
illuminated: Button '1' function symbols indicate international display. Reversible to German display with button '2'. Button '5' additional SECAM WEST and/or NTSC reception
(Multistandard). Reversible to Single Standard with button '3'.
Store: Stand-By. Nordmende ICC10
CTV
Service Mode
Switch to Stand By. Switch off with the mains switch. Press and hold 'VT' on RC then switch on with the mains switch.
Nordmende
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press blue button on RC and switch on TV with main switch. Press blue button again. (WARNING: scart must be free.)
Palladium
TV-100
CTV
Service Mode
Simultaneous press red & blue buttons on RC
then (in 5 sec.) simultaneously press P- & P+
on local keyboard. Commands:
arrows. Store: OK. Exit: TV.
Panasonic
EURO-1
CTV
Service Mode
In Sound-Menu Low-tone-regel to MAX and High-tone-regel to MIN. Press VOL- on TV and RESET on RC in some time.
Select:
red
and green buttons. Adjust:
yellow and blue buttons.
Store:
'STORE'. Exit: switch off. Panasonic EURO-2
CTV
Service Mode
In Sound-Menu Low-tone-regel to MAX and
High-tone-regel to MIN. Press 'F' button on TV. Then press VOL- on TV and REVEAL on RC in
some time. Select:
red and green buttons. Adjust:
yellow and blue buttons. Store:
'STR'. Exit:
'N' on RC. Panasonic MX-3
MX-3C CTV
Hotel Mode
ON:
Press simultaneously 'OFF TIMER' on RC
and 'CH.UP' local. OFF:
Press simultaneously 'OFF TIMER' on RC
and 'VOL-' local. Panasonic
MX-3
MX-3C CTV
Service Mode
Simultaneously press 'RECALL' on RC and
'VOL-' local. Exit: 'NORMAL' on RC.
Philips ANUBIS B CTV
Hotel Mode
ON:
Set HOTEL ON in Service Menu. Select programm 38. Simultaneous press (3 sec) INSTALL & P- on local keyboard.
OFF:
Set HOTEL OFF in Service Menu. Philips
ANUBIS B CTV
Service Mode
Simultaneously press VOL+ & P- on RC. Exit: STANDBY.
Philips Anubis S CTV
Hotel Mode
OFF:
Select programm 38. Simultaneous press
(3 sec) PR+ & VOL- on local keyboard. ON:
Select programm 38. Simultaneous press
(3 sec) STORE & PR- on local keyboard. Philips
L7.1A CTV
Service Mode
With special service RC. Or short M25, M25
on board and then switch on TV. Exit:
st-by. Philips L9.1
CTV
Hotel Mode
Select program 38 on the TV. Simultaneously press the keys VOLUME- and VOLUME+ on
the keyboard of the TV and the OSD key of the remote control.
Philips
L9H CTV
Service Mode This model also supports the 062596 sequence followed by [MENU] (service default) or
[i+]/[OSD] (service mode). Philips
MD1.2E CTV
Service Mode
There is a small Service jumper to short on the small signal PCB. When the TV is in this first level service mode, you can go in the second level service mode by pressing both MENU
and - keys on top of the TV at the same time. There you can read much parameters and proceed with most of the adjustments. In fact this method let you use an ordinary Remote control but you also need to open the back
cover. With the special service remote control,
a special code is sent to enter the service mode. Philips
MG3.1E CTV
Service Mode
Option 1: In the TV-set itself is a 3-pin connector with which either SERVICE-DEFAULT or
SERVICE-MODE can be activated. This connector is depicted 0356 (SERVICE-PINS) on page K7 (TXT&CONTROL). Shorting pins 1-2
will activate SERVICE-MODE. Shorting pins 2-3 will activate SERVICE-DEFAULT. Option 2: Activate these modes using the remote control. Obviously option 2 is the preferred method because the settings have to be changed using a remote control anyway.... To activate SERVICE-DEFAULT: Press 0 6 2 5 9 6 and then
the [menu] button. The message `Service Default' appears and channel `SER T' will be selected. This only sets some settings to a preset value
(color/brightness/volume and such). This mode is primarily intended to be used when the non volatile memory has been replaced. It is then loaded with the default values. To activate SERVICE-MODE: Press 0 6 2 5 9 6 and then
the [i+] button. After pressing 0 6 2 5 9 6 the message `Dealer' should have appeared.
Do not worry about the channel changing while you press the numbers.
Service technicians have the means of entering service mode using a special remote control. Philips
29PT9416
MG7.1
CTV
Service Mode
Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press
'MENU' again to clear it. The other way is to short the two service pins on the signal panel
(pins 2 and 3 of connector 0356). The advantage of this last method is that all the software protections are turned off.
Philips
Y6
CTV
Service Mode
Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press
'MENU' again to clear it. Philips
VR210/58
VCR Modulator off
Without cassette. Press and hold SYSTEM till
'G591' appears. Press and hold CLEAR(CL) till
'MOFF' appears. Exit: TV/STANBY. Philips VR210/58
VCR Modulator on
Without cassette. Press and hold SYSTEM till
'MOFF' appears. Press and hold CLEAR(CL) till
'G591' appears. Exit: TV/STANBY. Philips VR220/58
VCR
Child Lock
Cancel
Press CHILD LOCK (key-simbol) on the RC for 5s with the VCR switched on. Philips
VR220/58
VCR Modulator on/off
Without cassette. Press and hold STOP on the
RC and then press STOP/EJECT on VCR.
Select the line 'MODULATOR' on the TV screen
or 'MOD+' in the display with P+/-. In the display select 'OFF' / 'MOD-' (modulator off) with VOL-
or 'MOD+' (modulator on). Confirm with OK. Exit with MENU
Philips
VR220/58
VCR Modulator preset
Without cassette. Hold the STOP button on the RC. In addition press the STOP/EJECT button on the VCR until the pre-set modulator frequency appears in the display, e.g. 'M591'
(591MHz or 36 ch. UHF). Select line 'OPTIMIZE FREQUENCY' using P+/-. Enter new
modulator frequency with the numbers 0-9. In line 'SOUND SYSTEM' select the TV system using VOL+/-. 'G' = PAL B/G. 'K' = SECAM D/K. Confirm with OK. 'STORED' will appear briefly on the screen.
Philips
VR220/58
VCR Reset to factory settings
Disconect from the mains power supply. Press and hold the STANDBY/ON button on the device and reconnect to the mains power supply. Release the button when 'OSD' appears in the VCR display.
Philips
VR400/58
VCR
Auto ST-BY
off
Press and hold STOP till [] appears. Philips
VR400/58
VCR Modulator off
Without cassette. Press and hold SYSTEM till
'G591' appears. Press and hold CLEAR(CL) till
'MOFF' appears. Exit: TV/STANBY. Philips VR400/58
VCR Modulator on
Without cassette. Press and hold SYSTEM till
'MOFF' appears. Press and hold CLEAR(CL) till
'G591' appears. Exit: TV/STANBY. Philips VR400/58
VCR Modulator preset
Without cassette. VCR st-by. Press and hold
SYSTEM till 'G591' appears. System change:
SELECT.
Freq. Change: P +/-.
Store: OK. Exit:
TV/STANBY.
Revox D-TV C9003
CTV
Service Mode
On the local control press function key five times
(indication "Service" will appear), afterwards within a sec. press key "MEN" on the remote control.
Store: X. Exit: TV.
Saba ULTRACOLOR T55U42 T55U43
T63U42 T63U43
ICC5115ML 110
ICC5116MM 90° CTV Combination Lock Cancel
Switch off set with main switch. Switch on set with main switch and during doing this press the buttons + and - of volume control on the set's control bord simultaneously until the display lights. Display: SS... Press the button
'S' on the RC. Switch off with RC. Now the combination lock is unlocked and one can switch on again in the normal manner.
Saba
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Saba
T7032VT TX92
CTV
Hotel Mode
Cancel
Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.
Salora
28N8S
2B-F CTV
Service Mode
Quick press: --\-, MENU, TV. Salora
17/21SF 25/28X71
25/28SP50
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV
Samsung
CB-14F1 CB-20P30
CB-20H1 CB-20S20
CB-21H1 CB-21P30
CB-21S20 CB-3373
CB-5020 CB-5073
CB-5079 CB-5320
CB-5373 CB-5379
S15A CTV
Service Mode
STAND-BY --> DISPLAY --> P.STD --> MUTE --> POWER ON.
Controls:
VOL +/-, CH +/-. Exit:
POWER OFF. Samsung CK5038
SCT11B CTV
Service Mode
STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.
Controls:
VOL +/-, CH +/-. Exit:
STATUS.
Samsung
CX5944 CX6844
SCT12B CTV
Service Mode
STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.
FACTORY MODE: set PSL=15 and PVA=63. Controls:
VOL +/-, CH +/-. Exit:
STATUS Samsung
CB-14V10 CB-3373
CB-14V20 CB-5073
CB-20P30 CB-5079
CB-20S10 CB-5373
CB-20S20
CB-21P30
CB-21S10
CB-21S20
SCT13B CTV
Service Mode
STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.
Controls:
VOL +/-, CH +/-. Exit:
STATUS. Samsung CS7272
SCT51A CTV
Service Mode
PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON
Samsung
CS-721
CS-723
SCT52A CTV
Service Mode
PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON
Samsung
TVP3350
TVP5050
SCV11A SCV11B
CTV/VCR Service Mode
STAND-BY --> P.STD --> MENU --> SLEEP --> POWER ON
Schneider
DTV 1
CTV
Service Mode
Simultaneous press Service-button on digi- bord & button C on RC.
Selection: Bass +/-. Adjust: Volume +/-.
Store: T. Exit: TV.
Schneider
DTV 100
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & P+ on local keyboard.
Commands: arrows. Store: OK.
Exit: TV.
Schneider
DTV 2
CTV
Service Mode
Like DTV 1 or simultaneous press Service- button (down right on RC) & C button on RC. Selection:
Bass +/-. Adjust: Volume +/-. Store: IDEAL. Exit:
TV. Schneider DTV 3
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: wheel. Adjust: ring. Store:
red button. Exit:
OFF. Schneider TV 4
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider STV7128
TV 8
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider TV 9
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider STV355FST CTV
Service Mode
MENU --> SERVICE --> OK --> 089
SEG
11AK18
CTV
Service Mode
MENU 1 6 7 5
SEG
11AK19
CTV
Service Mode
MENU 4 7 2 5
Seleco STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:OK (M). Exit:TV
Sharp
4BSA CTV
Service Mode
Short conntacts 2 & 6 on bord TB connector and press button 'MODE' on RC. Remove short. Store:auto.
Exit:'MODE'. Sharp
63CS-03S CS
CTV
Service Mode
Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.
Store:'POWER'. Sharp
D3000
CTV
Service Mode
Press Service-button on Digi-modul. Storen/off.
Exit:Service button. Sharp
Euro-DS1
CTV
Service Mode
Short conntacts 2 & 6 on Digi Modul Service Slot and then press button 'MODE' on RC. Storeromb-symbol) on RC.
Exit:standby, switch off, switch on, remove short. Sharp
54AT-15SC CTV
Service Mode
Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.
Store:'POWER'. Sharp
DV-5401S CTV
Service Mode
Locate place for 2 buttons on local keyboard
(main board) S754-MODE and S755-PRESET. Enter:short S754 (-SERV
.Commands:CH +/-. Store:short S755.
Siemens
FS369M4
CS9409
CTV
Service Mode
Info Center' --> 'Special Functions' --> 'Service'
--> Code Number 089
Siemens SAT Programm Lock
Unlock: Press key-symbol and 6 1 0 1.
Silva STV355FST CTV
Service Mode
MENU --> SERVICE --> OK --> 089
Sony
KV-E2531
KV-E2931
KV-E3431
AE-2
CTV
Service Mode
Turn on the main power switch of the set while pressing any two buttons on the front panel.
'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC.
In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.
Sony
KV-2170
KV-2180
KV-2540
BE4
CTV
Service Mode
? --> 5 --> VOL+ --> TV --> MENU Exit: 00
Sony
KV-B2911
CTV
Service Mode
Turn on the main power switch of the set while pressing any two buttons on the front panel.
'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC.
In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.
Sony
KV-G21M1
CTV
Service Mode
Switch TV to STANDBY.
DISPLAY --> 5 --> VOL+ --> POWER
Telefunken
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Telefunken
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:cursor buttons. Store:OK (M).
Exit:TV Telefunken TX-90
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Telefunken
TX-91
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Thomson
ICC19
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold blue button and then switch on with the mains switch. Press blue button again. Exit: switch off with mains switch. Thomson
ICC19
CTV
Service Mode
Switch to Standby. Switch off with the mains switch. Press and hold 'PROG-' and 'VOL-' and then switch on with the mains switch. Exit: switch off with mains switch.
Thomson
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Thomson
TX-90
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Thomson
TX-91
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Toshiba a2150
S5E CTV
Service Mode
Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard. Select: PR nr.. Adjust: VOL+/-. Store: auto. Exit: 'STANDBY'. Test picture: 'AV'.
Toshiba
2876DD
2988DG CTV
Service Mode
Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard. Select:PR+/-.
Adjust:VOL+/-. Store:auto.
Exit:'STANDBY'. Test picture: 'AV'.
Universum
6000
CTV
Service Mode
Switch on with main switch. Press 'MENU',
'TV', 'i'. If TV is still in st-by press 2x'TV', 'i'. Select and adjust with cursors. Store: 'OK'.
Exit: switch off with main switch
Yorum