Yumatu MX onto MX Reader upgrade

Kapat
X
 
  • Zaman
  • Gösterim
Clear All
yeni mesajlar
  • dantech
    Junior Member
    • 03-02-2009
    • 2

    Yumatu MX onto MX Reader upgrade

    Dear All,
    Here you have description how to upgrade the hardware standard yumatu MX onto Yumatu MX Reader. It is necessary to use firmware for MX Reader of course. Sometimes it is necessary to change downloaded file extension onto .rar (some server fault).
    Solution is based on original reader board. Our solution has internal clock generator because there are some 5518 versions without clock signal support. The upgrade was tested in Globo 6000 receiver.


    Globo Digital :: Zaloguj

    next link:
    DVHK UPLOAD | Detale pliku
    Son düzenleme dantech; 04-02-2009, 17:21.
  • dantech
    Junior Member
    • 03-02-2009
    • 2

    #2
    Konu: Yumatu MX onto MX Reader upgrade

    Important: The card slot has to have card insertion sensor opened without card inside. There is opposite variant available.

    Here you have PCB layout as a Gerber files:

    Son düzenleme dantech; 05-02-2009, 11:51.

    Yorum

    İşlem Yapılıyor